Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you plan to try to remove the window repair panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor, Upvc window Repairs where they could be trampled.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows to access the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you aren't able to move the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and do an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't, Upvc Window Repairs you can use a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up might need to be removed before a fresh layer is applied. It is important to remember that when it comes to upvc window repairs (look at this now), you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with ease it could be hinges at the fault. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like any mechanical part, hinges can wear out over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a particular manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also stop corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges, also due to wear and tear may become displaced, which can cause gaps to develop where the sash joins the frame. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The second is the interlock, which is on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes filled with some sort of filler and can be positioned on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it is cheaper to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.